DIY Stand from Grant VanderMye

basic picture of left MGIIIA in system
close-up of the modified stock feet
sand-filled tubes truss the back of the panels
Just thought I might share a few pic's of the stands I had made. The stands are made of 1/8" wall tubing, the upright arms are sand fillable. These stands tightened up the bass response of my MGIIIA's quite significantly. They also seem to be more coherant somehow (not sure if that is coherant). They fasten at the base with the stock locations, at the top with a clamping system. They are also fitted with threaded spikes.